ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
22.225 × 42.6 mm

Flanged ball bearing units

F2B 014-FM

Two-bolt oval flange bearing for 7/8 in (22.225 mm) shafts, locked with an eccentric collar.

Bore d
22.225 mm
Width B
42.6 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 014-FM is a cast iron oval flange unit for 7/8 in (22.225 mm) shafts. It steps up to a larger housing than our 012 units, with bolt holes 98.8 mm apart and a 14 kN dynamic load rating. The sealed insert locks to the shaft with an eccentric collar.

Eccentric collar locking

The YET 205-014 insert has a narrow inner ring and an eccentric collar. You turn the collar with the direction of shaft rotation until it grips, then secure it with its set screw. This is a good fit for drives that always turn the same way.

Specifications

  • Shaft diameter (d): 7/8 in (22.225 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 42.6 mm
  • Inner ring width (B1): 31 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YET 205-014 (narrow inner ring, eccentric locking collar)
  • Locking: Eccentric collar with a 1/4-28 UNF set screw, about 4 N·m
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.631 kg

Mounting tips

  1. Fit the unit on a clean shaft and bolt it down with two 7/16 in bolts.
  2. Push the collar onto the inner ring.
  3. Turn it in the running direction until it locks, then tighten the set screw to about 4 N·m.
  4. Regrease through the fitting during maintenance.

The ECY 205 end cover fits this unit if you want to close off the shaft end.

Typical applications

  • Belt conveyors
  • Grain and feed equipment
  • Industrial drives
  • Material handling equipment

Key features

  • Fits 7/8 in (22.225 mm) shafts
  • Eccentric collar locking
  • 14 kN dynamic load rating
  • 98.8 mm bolt centres
  • Takes the ECY 205 end cover

Typical applications

  • Belt conveyors
  • Grain and feed equipment
  • Industrial drives
  • Material handling equipment

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 014-FM
Bore diameter (d) 22.225 mm
Width (B) 42.6 mm
Mass 0.631 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 014-FM
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 014-FM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 014-FM
Part number F2B 014-FM
Manufacturer part number F2B 014-FM
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 014-FM
Manufacturer Their designation Our equivalent
SKF F2B 014-FM F2B 014-FM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size does F2B 014-FM fit?

7/8 in (22.225 mm).

How far apart are the bolt holes?

98.8 mm.

What bolts are needed?

Two 7/16 in attachment bolts.

How is it locked?

With an eccentric collar turned in the direction of rotation and held by a set screw.

Need a price for F2B 014-FM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 014-FM Price on application
Get a quote

Quote for F2B 014-FM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.