ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
22.225 × 38.6 mm

Flanged ball bearing units

F2B 014-RM

Space-saving oval flange unit for 7/8 in shafts with a narrow inner ring and set screw locking.

Bore d
22.225 mm
Width B
38.6 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 014-RM is a two-bolt oval flanged ball bearing unit for 7/8 in (22.225 mm) shafts. A narrow inner ring keeps it short along the shaft, while the cast iron housing gives a solid mounting on frames and machine walls.

Short, simple and sealed

The YAT 205-014 insert is 27.2 mm wide across the inner ring and locks with set screws. With seals on both sides and a grease fitting in the housing, it is easy to install and look after. At about 0.62 kg it is a little lighter than the eccentric collar version.

Specifications

  • Shaft diameter (d): 7/8 in (22.225 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 38.6 mm
  • Inner ring width (B1): 27.2 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YAT 205-014 (narrow inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF), about 4 N·m
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.62 kg

Mounting tips

  1. Clean the shaft and check it for burrs.
  2. Slide the unit into place and bolt it down with 7/16 in bolts.
  3. Tighten the 1/4-28 UNF set screws to about 4 N·m after alignment.
  4. Top up the grease during routine checks.

Typical applications

  • Compact conveyors
  • Packaging and bottling machines
  • Light industrial drives
  • Frames with tight shaft space

Key features

  • Fits 7/8 in (22.225 mm) shafts
  • Narrow 27.2 mm inner ring
  • Set screw locking
  • Sealed on both sides
  • About 0.62 kg

Typical applications

  • Compact conveyors
  • Packaging and bottling machines
  • Light industrial drives
  • Frames with tight shaft space

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 014-RM
Bore diameter (d) 22.225 mm
Width (B) 38.6 mm
Mass 0.62 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 014-RM
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 014-RM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 014-RM
Part number F2B 014-RM
Manufacturer part number F2B 014-RM
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 014-RM
Manufacturer Their designation Our equivalent
SKF F2B 014-RM F2B 014-RM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft does F2B 014-RM fit?

A 7/8 in (22.225 mm) shaft.

Why choose the RM version?

Its narrow inner ring leaves more free shaft beside the housing.

What is the limiting speed?

7 000 r/min with an h6 shaft.

What end cover fits?

The ECY 205 end cover.

Need a price for F2B 014-RM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 014-RM Price on application
Get a quote

Quote for F2B 014-RM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.