ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
71.4 × 29 mm

Bearing end covers

ECB 505-25M/D

A low-profile end cover for size 05 ball bearing units. 71.4 mm at the open end, just 29 mm deep, fitted without tools.

Outside D
71.4 mm
Width B
29 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 505-25M/D is a low-profile end cover for size 05 ball bearing units. Once pressed into the housing it shields the end of the shaft. That cuts the risk of anything snagging on it and keeps grit and spray away from the bearing seal.

Made for short shaft ends

The overall width is 29 mm, which is 5.5 mm less than the standard ECB 505. That small difference matters on compact machines where the unit is mounted close to a side plate or guard. The cover steps down from 71.4 mm at the open end to 53.2 mm at the closed face.

Material and dimensions

It is moulded as a single piece from thermoplastic polyurethane. TPU is firm but has a little flex, so the cover grips the housing without any fasteners. Normal greases, oils and cleaning fluids do not harm it, and it is rated to 100 °C.

  • Outside diameter at open end (D1): 71.4 mm
  • Outside diameter at closed end (D): 53.2 mm
  • Anchorage diameter (D2): 66.9 mm
  • Overall width (A): 29 mm
  • Weight: approx. 20 g
  • Material: TPU

Fitting and removal

  1. Clean out the housing opening.
  2. Hold the cover straight and centred on the bore.
  3. Press it in, working around the rim, until it is fully seated.

For lubrication or checks, take it out by pulling straight back. Refit it the same way.

Before you order

Confirm your housing has a 71.4 mm opening and that the shaft end and collar stay within 29 mm of the housing face. If you are not sure whether this cover or another size 05 cover suits your unit, send us the full bearing unit designation and we will match it.

Where it is used

  • Light conveyors and transfer lines
  • Packaging and bottling equipment
  • Agricultural implements
  • Compact fans and blowers
  • Machines with short shaft ends

Key features

  • Low 29 mm profile
  • Presses in by hand, nothing to screw down
  • TPU resists grease, oil and wash-down fluids
  • Works up to 100 °C
  • Easy to remove and refit

Typical applications

  • Light conveyors and transfer lines
  • Packaging and bottling equipment
  • Agricultural implements
  • Compact fans and blowers
  • Machines with short shaft ends

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 505-25M/D
Outside diameter (D) 71.4 mm
Width (B) 29 mm
Mass 0.02 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 505-25M/D
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 505-25M/D
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 505-25M/D
Part number ECB 505-25M/D
Manufacturer part number ECB 505-25M/D

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 505-25M/D
Manufacturer Their designation Our equivalent
SKF ECB 505-25M/D ECB 505-25M/D

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What does the ECB 505-25M/D fit?

It is an end cover for size 05 ball bearing units with a 71.4 mm housing opening.

How much shallower is it than the ECB 505?

It is 29 mm deep, compared with 34.5 mm for the standard ECB 505.

Do I need any tools?

No. It presses into the housing by hand.

Will cleaning chemicals damage it?

TPU stands up well to common cleaning agents, grease and oil.

Can it be reused?

Yes. Pull it out for servicing and press it back in afterwards.

Need a price for ECB 505-25M/D?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 505-25M/D Price on application
Get a quote

Quote for ECB 505-25M/D

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.