F2B 100-FM
Two-bolt oval flange unit for 1 in shafts with eccentric collar locking and a cast iron housing.
- Bore d
- 25.4 mm
- Width B
- 42.6 mm
- Dynamic C
- 14 kN
- Static C₀
- 7.8 kN
- Limiting speed
- 7,000 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 100-FM is a two-bolt oval flange unit for 1 in (25.4 mm) shafts. It follows North American inch standards and has a sealed YET 205-100 insert locked by an eccentric collar.
Inch shaft, easy locking
The collar is turned with the shaft rotation and held by a 1/4-28 UNF set screw. The housing takes two 7/16 in bolts on 98.8 mm centres, the same pattern as our 7/8 in and 15/16 in units.
Specifications
- Shaft diameter (d): 1 in (25.4 mm)
- Bolt hole centres (J): 98.8 mm
- Overall height (H): 123.8 mm
- Overall length (L): 69.9 mm
- Housing width (A): 29.6 mm
- Overall width (T): 42.6 mm
- Inner ring width (B1): 31 mm
- Bolt holes (N): 12.7 mm, for 7/16 in bolts
- Basic dynamic load rating (C): 14 kN
- Basic static load rating (C0): 7.8 kN
- Fatigue load limit (Pu): 0.335 kN
- Limiting speed: 7 000 r/min (h6 shaft)
- Insert bearing: YET 205-100 (narrow inner ring, eccentric locking collar)
- Locking: Eccentric collar with a 1/4-28 UNF set screw
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.605 kg
How to fit it
- Clean the 1 in shaft.
- Bolt the flange down with two 7/16 in bolts.
- Turn the collar in the running direction until it locks.
- Tighten the collar set screw.
The ECY 205 end cover fits this unit.
Where it is used
- Belt conveyors
- Farm machinery
- Packaging lines
- Industrial drives
Key features
- Fits 1 in (25.4 mm) shafts
- Eccentric collar locking
- Sealed on both sides
- 98.8 mm bolt centres
- Takes the ECY 205 end cover
Typical applications
- Belt conveyors
- Farm machinery
- Packaging lines
- Industrial drives
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 25.4 mm |
|---|---|
| Width (B) | 42.6 mm |
| Mass | 0.605 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 14 kN |
|---|---|
| Basic static load rating (C₀) | 7.8 kN |
| Fatigue load limit (Pu) | 0.335 kN |
| Limiting speed | 7000 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 100-FM |
|---|---|
| Manufacturer part number | F2B 100-FM |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 100-FM |
F2B 100-FM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 100-FM fit?
A 1 in (25.4 mm) shaft.
What bolts are needed?
Two 7/16 in bolts, 98.8 mm apart.
What is the dynamic load rating?
14 kN.
What end cover fits?
The ECY 205 end cover.
Need a price for F2B 100-FM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
