F2B 102-TF
1-1/8 in oval flange unit with set screw locking, an extended inner ring and flinger seals.
- Bore d
- 28.575 mm
- Width B
- 43.2 mm
- Dynamic C
- 19.5 kN
- Static C₀
- 11.2 kN
- Limiting speed
- 6,300 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 102-TF is a cast iron two-bolt oval flange unit for 1-1/8 in (28.575 mm) shafts. Inside is a sealed YAR 206-102-2F insert with an extended inner ring and set screw locking.
Works in both directions
The 38.1 mm inner ring is held by 1/4-28 UNF set screws, so the bearing stays put whether the shaft runs forward or in reverse. Flingers help keep dust and grit out.
Specifications
- Shaft diameter (d): 1-1/8 in (28.575 mm)
- Bolt hole centres (J): 116.7 mm
- Overall height (H): 141.3 mm
- Overall length (L): 79.4 mm
- Housing width (A): 34.9 mm
- Overall width (T): 43.2 mm
- Inner ring width (B1): 38.1 mm
- Bolt holes (N): 12.7 mm, for 7/16 in bolts
- Basic dynamic load rating (C): 19.5 kN
- Basic static load rating (C0): 11.2 kN
- Fatigue load limit (Pu): 0.475 kN
- Limiting speed: 6 300 r/min (h6 shaft)
- Insert bearing: YAR 206-102-2F (extended inner ring, set screw locking)
- Locking: Set screws (1/4-28 UNF)
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.93 kg
How to fit it
- Check that the shaft is clean.
- Bolt the unit down with two 7/16 in bolts on 116.7 mm centres.
- Align the shaft and tighten the set screws.
- Relubricate through the grease fitting.
Where it is used
- Reversing conveyors
- Material handling
- Farm equipment
- Process lines
Key features
- Fits 1-1/8 in (28.575 mm) shafts
- Set screw locking
- Extended 38.1 mm inner ring
- Seals with flingers
- Takes the ECY 206 end cover
Typical applications
- Reversing conveyors
- Material handling
- Farm equipment
- Process lines
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 28.575 mm |
|---|---|
| Width (B) | 43.2 mm |
| Mass | 0.93 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 19.5 kN |
|---|---|
| Basic static load rating (C₀) | 11.2 kN |
| Fatigue load limit (Pu) | 0.475 kN |
| Limiting speed | 6300 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 102-TF |
|---|---|
| Manufacturer part number | F2B 102-TF |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 102-TF |
F2B 102-TF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 102-TF fit?
A 1-1/8 in (28.575 mm) shaft.
Can it run in reverse?
Yes. Set screw locking works both ways.
What is the overall width?
43.2 mm.
How much does it weigh?
About 0.93 kg.
Need a price for F2B 102-TF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
