F2B 100-LF-AH
Air handling version of the 1 in concentric lock flange unit, with flinger seals and a cast iron housing.
- Bore d
- 25.4 mm
- Width B
- 40.3 mm
- Dynamic C
- 14 kN
- Static C₀
- 7.8 kN
- Limiting speed
- 7,000 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 100-LF-AH is a two-bolt oval flange unit for 1 in (25.4 mm) fan and blower shafts. It is specified for air handling duty and shares its size and load ratings with the F2B 100-LF.
Made for air handling
Fans often run for long hours at a steady speed. This unit uses concentric locking, which grips the shaft evenly, and has flingers in front of the seals to keep airborne dust out.
Specifications
- Shaft diameter (d): 1 in (25.4 mm)
- Bolt hole centres (J): 98.8 mm
- Overall height (H): 123.8 mm
- Overall length (L): 69.9 mm
- Housing width (A): 29.6 mm
- Overall width (T): 40.3 mm
- Inner ring width (B1): 33.2 mm
- Bolt holes (N): 12.7 mm, for 7/16 in bolts
- Basic dynamic load rating (C): 14 kN
- Basic static load rating (C0): 7.8 kN
- Fatigue load limit (Pu): 0.335 kN
- Limiting speed: 7 000 r/min (h6 shaft)
- Insert bearing: YSP 205-100 SB-2F (concentric locking)
- Locking: Concentric locking, tightened with an M5 screw
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.578 kg
How to fit it
- Clean the fan shaft.
- Bolt the flange to the fan frame with 7/16 in bolts.
- Align the shaft.
- Tighten the M5 locking screw.
Where it is used
- Air handling units
- Supply and exhaust fans
- Blowers
- HVAC systems
Key features
- Specified for air handling
- Fits 1 in (25.4 mm) shafts
- Concentric locking
- Seals with flingers
- Up to 7 000 r/min
Typical applications
- Air handling units
- Supply and exhaust fans
- Blowers
- HVAC systems
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 25.4 mm |
|---|---|
| Width (B) | 40.3 mm |
| Mass | 0.578 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 14 kN |
|---|---|
| Basic static load rating (C₀) | 7.8 kN |
| Fatigue load limit (Pu) | 0.335 kN |
| Limiting speed | 7000 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 100-LF-AH |
|---|---|
| Manufacturer part number | F2B 100-LF-AH |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 100-LF-AH |
F2B 100-LF-AH |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is F2B 100-LF-AH used for?
Air handling equipment such as fans and blowers.
Is it the same size as F2B 100-LF?
Yes. Dimensions and load ratings are the same.
What shaft does it fit?
A 1 in (25.4 mm) shaft.
How is it locked?
With concentric locking tightened by an M5 screw.
Need a price for F2B 100-LF-AH?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
