ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
25.4 × 38.9 mm

Flanged ball bearing units

F2B 100-TF-AH

Air handling version of the 1 in set screw flange unit, with flinger seals and a cast iron housing.

Bore d
25.4 mm
Width B
38.9 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 100-TF-AH is a two-bolt oval flange unit for 1 in (25.4 mm) fan and blower shafts. It is specified for air handling work and has the same size and load ratings as the F2B 100-TF.

Built for fans

The YAR 205-100-2F insert locks with set screws and has flingers in front of the seals to keep airborne dust away. It bolts to the fan frame through two holes 98.8 mm apart.

Specifications

  • Shaft diameter (d): 1 in (25.4 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 38.9 mm
  • Inner ring width (B1): 34.1 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YAR 205-100-2F (extended inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF)
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.578 kg

How to fit it

  1. Clean the fan shaft.
  2. Bolt the flange to the frame with 7/16 in bolts.
  3. Align the shaft and tighten the set screws.
  4. Regrease as your fan maintenance plan says.

Where it is used

  • Air handling units
  • Centrifugal fans
  • Blowers
  • HVAC equipment

Key features

  • Specified for air handling
  • Fits 1 in (25.4 mm) shafts
  • Set screw locking
  • Seals with flingers
  • Up to 7 000 r/min

Typical applications

  • Air handling units
  • Centrifugal fans
  • Blowers
  • HVAC equipment

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 100-TF-AH
Bore diameter (d) 25.4 mm
Width (B) 38.9 mm
Mass 0.578 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 100-TF-AH
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 100-TF-AH
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 100-TF-AH
Part number F2B 100-TF-AH
Manufacturer part number F2B 100-TF-AH
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 100-TF-AH
Manufacturer Their designation Our equivalent
SKF F2B 100-TF-AH F2B 100-TF-AH

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What is F2B 100-TF-AH for?

Air handling equipment such as fans and blowers.

Does it fit the same mounting as F2B 100-TF?

Yes. The dimensions are the same.

What shaft does it fit?

A 1 in (25.4 mm) shaft.

What is the limiting speed?

7 000 r/min.

Need a price for F2B 100-TF-AH?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 100-TF-AH Price on application
Get a quote

Quote for F2B 100-TF-AH

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.