F2B 40M-TF
40 mm oval flange bearing with set screw locking, an extended inner ring and flinger seals.
- Bore d
- 40 mm
- Width B
- 55.6 mm
- Dynamic C
- 30.7 kN
- Static C₀
- 19 kN
- Limiting speed
- 4,800 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 40M-TF is a cast iron oval flange unit for 40 mm shafts. Inside is a sealed YAR 208-2F insert with an extended inner ring that locks with set screws.
Easy to fit, works both ways
The 49.2 mm inner ring uses M8x1 set screws, so it holds the shaft in either direction of rotation. Flingers on both sides help in dusty plants.
Specifications
- Shaft diameter (d): 40 mm
- Bolt hole centres (J): 143.8 mm
- Overall height (H): 171.5 mm
- Overall length (L): 104.8 mm
- Housing width (A): 38.9 mm
- Overall width (T): 55.6 mm
- Inner ring width (B1): 49.2 mm
- Bolt holes (N): 14.3 mm, for M12 bolts
- Basic dynamic load rating (C): 30.7 kN
- Basic static load rating (C0): 19 kN
- Fatigue load limit (Pu): 0.8 kN
- Limiting speed: 4 800 r/min (h6 shaft)
- Insert bearing: YAR 208-2F (extended inner ring, set screw locking)
- Locking: Set screws (M8x1)
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 1.57 kg
How to fit it
- Clean the shaft and remove any burrs.
- Bolt the unit down with two M12 bolts on 143.8 mm centres.
- Align the shaft and tighten the M8x1 set screws.
- Relubricate through the grease fitting as needed.
Where it is used
- General conveyors
- Reversing drives
- Bulk handling
- Processing lines
Key features
- Fits 40 mm shafts
- Set screw locking
- Extended 49.2 mm inner ring
- Seals with flingers
- Takes the ECY 208 end cover
Typical applications
- General conveyors
- Reversing drives
- Bulk handling
- Processing lines
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 40 mm |
|---|---|
| Width (B) | 55.6 mm |
| Mass | 1.57 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 30.7 kN |
|---|---|
| Basic static load rating (C₀) | 19 kN |
| Fatigue load limit (Pu) | 0.8 kN |
| Limiting speed | 4800 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 40M-TF |
|---|---|
| Manufacturer part number | F2B 40M-TF |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 40M-TF |
F2B 40M-TF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft size does F2B 40M-TF fit?
A 40 mm shaft.
Can it run in reverse?
Yes. Set screw locking works both ways.
What is the fatigue load limit?
0.8 kN.
How much does it weigh?
About 1.57 kg.
Need a price for F2B 40M-TF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
