ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
28.575 × 47.7 mm

Flanged ball bearing units

F2B 102-FM

Oval flange unit for 1-1/8 in shafts with eccentric collar locking and a 19.5 kN dynamic rating.

Bore d
28.575 mm
Width B
47.7 mm
Dynamic C
19.5 kN
Static C₀
11.2 kN
Limiting speed
6,300 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 102-FM is a two-bolt oval flange unit for 1-1/8 in (28.575 mm) shafts. It steps up to a larger housing with bolt holes 116.7 mm apart and a 19.5 kN dynamic rating.

Collar locking for one-way drives

The YET 206-102 insert has a narrow inner ring and an eccentric collar held by a 5/16-24 UNF set screw. Turn the collar with the shaft rotation until it grips.

Specifications

  • Shaft diameter (d): 1-1/8 in (28.575 mm)
  • Bolt hole centres (J): 116.7 mm
  • Overall height (H): 141.3 mm
  • Overall length (L): 79.4 mm
  • Housing width (A): 34.9 mm
  • Overall width (T): 47.7 mm
  • Inner ring width (B1): 35.7 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 19.5 kN
  • Basic static load rating (C0): 11.2 kN
  • Fatigue load limit (Pu): 0.475 kN
  • Limiting speed: 6 300 r/min (h6 shaft)
  • Insert bearing: YET 206-102 (narrow inner ring, eccentric locking collar)
  • Locking: Eccentric collar with a 5/16-24 UNF set screw
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.894 kg

How to fit it

  1. Clean the shaft.
  2. Bolt the unit down with two 7/16 in bolts.
  3. Turn the collar in the running direction until it is tight.
  4. Tighten the collar set screw.

The ECY 206 end cover fits this unit.

Where it is used

  • Belt conveyors
  • Grain handling
  • Farm machinery
  • Industrial drives

Key features

  • Fits 1-1/8 in (28.575 mm) shafts
  • Eccentric collar locking
  • 19.5 kN dynamic rating
  • 116.7 mm bolt centres
  • Takes the ECY 206 end cover

Typical applications

  • Belt conveyors
  • Grain handling
  • Farm machinery
  • Industrial drives

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 102-FM
Bore diameter (d) 28.575 mm
Width (B) 47.7 mm
Mass 0.894 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 102-FM
Basic dynamic load rating (C) 19.5 kN
Basic static load rating (C₀) 11.2 kN
Fatigue load limit (Pu) 0.475 kN
Limiting speed 6300 r/min

Design and execution

Design & execution for F2B 102-FM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 102-FM
Part number F2B 102-FM
Manufacturer part number F2B 102-FM
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 102-FM
Manufacturer Their designation Our equivalent
SKF F2B 102-FM F2B 102-FM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft does F2B 102-FM fit?

A 1-1/8 in (28.575 mm) shaft.

What is the bolt spacing?

116.7 mm.

What are the load ratings?

19.5 kN dynamic and 11.2 kN static.

What end cover fits?

The ECY 206 end cover.

Need a price for F2B 102-FM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 102-FM Price on application
Get a quote

Quote for F2B 102-FM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.