F2B 35M-TF
35 mm oval flange unit with set screw locking, an extended inner ring and seals with flingers.
- Bore d
- 35 mm
- Width B
- 48.4 mm
- Dynamic C
- 25.5 kN
- Static C₀
- 15.3 kN
- Limiting speed
- 5,300 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 35M-TF is a two-bolt oval flanged ball bearing unit for 35 mm shafts. A sealed insert with an extended inner ring sits in a cast iron housing and is fixed to the shaft with set screws.
A flexible all-rounder
Set screws hold the bearing whether the shaft runs forward or in reverse. The 42.9 mm inner ring gives them a firm seat. Flingers on both sides help keep out dust and grit.
Specifications
- Shaft diameter (d): 35 mm
- Bolt hole centres (J): 130 mm
- Housing width (A): 37.3 mm
- Overall width (T): 48.4 mm
- Inner ring width (B1): 42.9 mm
- Attachment bolts: M12 bolts
- Basic dynamic load rating (C): 25.5 kN
- Basic static load rating (C0): 15.3 kN
- Limiting speed: 5 300 r/min (h6 shaft)
- Locking: Set screws in the extended inner ring
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 1.2 kg
How to fit it
- Check that the shaft is clean and smooth.
- Fit the unit and bolt it down with M12 bolts.
- Align the shaft and tighten the set screws evenly.
- Regrease through the fitting during routine service.
Where it is used
- Reversing conveyors
- Material handling lines
- Farm equipment
- Process machinery
Key features
- Fits 35 mm shafts
- Set screw locking
- Extended 42.9 mm inner ring
- Seals with flingers
- 25.5 kN dynamic rating
Typical applications
- Reversing conveyors
- Material handling lines
- Farm equipment
- Process machinery
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 35 mm |
|---|---|
| Width (B) | 48.4 mm |
| Mass | 1.2 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 25.5 kN |
|---|---|
| Basic static load rating (C₀) | 15.3 kN |
| Limiting speed | 5300 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 35M-TF |
|---|---|
| Manufacturer part number | F2B 35M-TF |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 35M-TF |
F2B 35M-TF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 35M-TF fit?
A 35 mm shaft.
Can it handle reversing shafts?
Yes. Set screws work for both directions.
What is the overall width?
48.4 mm.
What is the static load rating?
15.3 kN.
Need a price for F2B 35M-TF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
