F2B 30M-FM
Heavy-duty two-bolt oval flange unit for 30 mm shafts, with a 19.5 kN dynamic rating and eccentric collar locking.
- Bore d
- 30 mm
- Width B
- 47.7 mm
- Dynamic C
- 19.5 kN
- Static C₀
- 11.2 kN
- Limiting speed
- 6,300 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 30M-FM is the largest eccentric collar unit in this group, built for 30 mm shafts. Its cast iron oval housing is 141.3 mm tall with bolt holes 116.7 mm apart, and the sealed YET 206 insert carries a 19.5 kN dynamic load rating.
More capacity for bigger shafts
Compared with the 25 mm units, the static rating rises to 11.2 kN and the fatigue load limit to 0.475 kN. The eccentric collar is held by an M8x1 set screw once it has been turned tight in the direction of rotation.
Specifications
- Shaft diameter (d): 30 mm
- Bolt hole centres (J): 116.7 mm
- Overall height (H): 141.3 mm
- Overall length (L): 79.4 mm
- Housing width (A): 34.9 mm
- Overall width (T): 47.7 mm
- Inner ring width (B1): 35.7 mm
- Bolt holes (N): 12.7 mm, for M10 bolts
- Basic dynamic load rating (C): 19.5 kN
- Basic static load rating (C0): 11.2 kN
- Fatigue load limit (Pu): 0.475 kN
- Limiting speed: 6 300 r/min (h6 shaft)
- Insert bearing: YET 206 (narrow inner ring, eccentric locking collar)
- Locking: Eccentric collar with an M8x1 set screw
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.868 kg
Mounting tips
- Fit the unit on a clean 30 mm shaft.
- Bolt it down with two M10 bolts on 116.7 mm centres.
- Turn the collar in the running direction until it locks.
- Tighten the M8x1 set screw.
The ECY 206 end cover fits this unit.
Typical applications
- Heavier conveyors
- Mixers and agitators
- Agricultural machinery
- Industrial fans
Key features
- Fits 30 mm metric shafts
- 19.5 kN dynamic rating
- Eccentric collar locking
- 116.7 mm bolt centres
- Takes the ECY 206 end cover
Typical applications
- Heavier conveyors
- Mixers and agitators
- Agricultural machinery
- Industrial fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 30 mm |
|---|---|
| Width (B) | 47.7 mm |
| Mass | 0.868 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 19.5 kN |
|---|---|
| Basic static load rating (C₀) | 11.2 kN |
| Fatigue load limit (Pu) | 0.475 kN |
| Limiting speed | 6300 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 30M-FM |
|---|---|
| Manufacturer part number | F2B 30M-FM |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 30M-FM |
F2B 30M-FM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 30M-FM fit?
A 30 mm shaft.
What is the bolt spacing?
116.7 mm.
What are the load ratings?
19.5 kN dynamic and 11.2 kN static.
What end cover fits?
The ECY 206 end cover.
Need a price for F2B 30M-FM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
