ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
45 × 58.1 mm

Flanged ball bearing units

F2B 45M-FM

Cast iron oval flange unit for 45 mm shafts with eccentric collar locking and a 33.2 kN dynamic rating.

Bore d
45 mm
Width B
58.1 mm
Dynamic C
33.2 kN
Static C₀
21.6 kN
Limiting speed
4,300 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 45M-FM is a two-bolt oval flange unit for 45 mm shafts. It has a cast iron housing with bolt holes 148.3 mm apart and a sealed insert that locks with an eccentric collar.

For bigger shafts and loads

With a 33.2 kN dynamic and 21.6 kN static rating, this is the strongest unit in this group. It is a good fit for heavy drives that run in one direction.

Specifications

  • Shaft diameter (d): 45 mm
  • Bolt hole centres (J): 148.3 mm
  • Housing width (A): 44.5 mm
  • Overall width (T): 58.1 mm
  • Inner ring width (B1): 43.7 mm
  • Attachment bolts: M12 bolts
  • Basic dynamic load rating (C): 33.2 kN
  • Basic static load rating (C0): 21.6 kN
  • Limiting speed: 4 300 r/min (h6 shaft)
  • Locking: Eccentric collar with set screw
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 1.76 kg

How to fit it

  1. Clean the 45 mm shaft.
  2. Bolt the unit down with two M12 bolts.
  3. Turn the collar in the running direction until it is tight.
  4. Lock it with its set screw.

Where it is used

  • Heavy belt conveyors
  • Agricultural machinery
  • Industrial drives
  • Large fans

Key features

  • Fits 45 mm shafts
  • Eccentric collar locking
  • 33.2 kN dynamic rating
  • 148.3 mm bolt centres
  • Sealed on both sides

Typical applications

  • Heavy belt conveyors
  • Agricultural machinery
  • Industrial drives
  • Large fans

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 45M-FM
Bore diameter (d) 45 mm
Width (B) 58.1 mm
Mass 1.76 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 45M-FM
Basic dynamic load rating (C) 33.2 kN
Basic static load rating (C₀) 21.6 kN
Limiting speed 4300 r/min

Design and execution

Design & execution for F2B 45M-FM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 45M-FM
Part number F2B 45M-FM
Manufacturer part number F2B 45M-FM
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 45M-FM
Manufacturer Their designation Our equivalent
SKF F2B 45M-FM F2B 45M-FM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft does F2B 45M-FM fit?

A 45 mm shaft.

What is the bolt spacing?

148.3 mm.

What is the limiting speed?

4 300 r/min.

How much does it weigh?

About 1.76 kg.

Need a price for F2B 45M-FM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 45M-FM Price on application
Get a quote

Quote for F2B 45M-FM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.