ECB 507/D
The short-body cover in our size 07 range. Fits a 91.1 mm housing opening, sits 29 mm deep, and pushes in by hand.
- Outside D
- 91.1 mm
- Width B
- 29 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 507/D is a short-body end cover for size 07 ball bearing units. It plugs the open side of the housing and covers the shaft end, making the machine safer to work around and giving the bearing extra protection from grit and wash water.
Same fit, less depth
The ECB 507/D fits the same 91.1 mm housing opening as the standard ECB 507, but only stands 29 mm off the housing face. That makes it the better option where a guard, pulley or bracket sits right in front of the unit. From the rim it narrows to 73.5 mm.
Material and dimensions
The cover is a one-piece TPU part. It resists grease, oil and the cleaning products used in food and wash-down areas, works up to 100 °C and has enough flex to snap into the housing by hand.
- Outside diameter at open end (D1): 91.1 mm
- Outside diameter at closed end (D): 73.5 mm
- Anchorage diameter (D2): 86.6 mm
- Overall width (A): 29 mm
- Weight: approx. 30 g
- Material: TPU
Fitting and removal
- Clear the housing bore of old lubricant and dirt.
- Hold the cover square to the opening.
- Press all the way round until the rim sits flush.
It comes out with a straight pull when you need to get at the bearing and goes back in the same way.
Before you order
Measure the housing opening (91.1 mm) and check that the shaft end and collar do not stick out more than 29 mm. If they do, the ECB 507 gives 36.5 mm of depth. We are happy to check your unit for you.
Where it is used
- Food and drink lines
- Belt and roller conveyors
- Farm equipment
- HVAC fans
- Machines with little room beside the bearing unit
Key features
- 29 mm overall width
- Hand-fitted, nothing to screw down
- Copes with oil, grease and detergents
- Rated up to 100 °C
- Can be removed and refitted
Typical applications
- Food and drink lines
- Belt and roller conveyors
- Farm equipment
- HVAC fans
- Machines with little room beside the bearing unit
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 91.1 mm |
|---|---|
| Width (B) | 29 mm |
| Mass | 0.03 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 507/D |
|---|---|
| Manufacturer part number | ECB 507/D |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 507/D |
ECB 507/D |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does the ECB 507/D fit?
Size 07 ball bearing units with a 91.1 mm housing opening.
When should I use the /D version?
When there is not enough room in front of the housing for the 36.5 mm deep ECB 507.
How is it installed?
Clean the opening and press the cover in by hand until it is flush.
What is it made of?
Thermoplastic polyurethane (TPU), moulded in one piece.
Is it reusable?
Yes. It can be pulled out and pressed back in.
Need a price for ECB 507/D?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
