ECY 207
A short polypropylene end cover for 207-size ball bearing units. 75 mm open end, 27 mm deep.
- Outside D
- 75 mm
- Width B
- 27 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 207 is a push-in end cover for 207-size ball bearing units. It encloses the shaft end at the housing, which keeps people clear of the turning shaft and helps keep the bearing clean.
Short body, firm fit
The ECY 207 is 27 mm deep, so it sits close to the housing without taking up much space. It measures 75 mm across the open end and 68.9 mm across the closed end, with a 76.5 mm anchorage diameter where it grips the bore.
Material and dimensions
It is made from polypropylene (PP) and weighs about 16 g. The cover resists most chemicals and is rated for temperatures up to 100 °C.
- Outside diameter at open end (D1): 75 mm
- Outside diameter at closed end (D): 68.9 mm
- Anchorage diameter (D2): 76.5 mm
- Overall width (A): 27 mm
- Weight: approx. 16 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean the housing bore.
- Line the cover up square to the shaft.
- Press it in by hand until fully seated.
It comes out with a straight pull and goes back in after servicing.
Before you order
Check for a 75 mm housing opening and enough room for the shaft end within 27 mm. For longer shaft ends, see the ECW 207.
Where it is used
- Bulk handling conveyors
- Paper converting machines
- Farm equipment
- Fans and air movers
Key features
- Short 27 mm body
- Fits 207-size units
- PP, about 16 g
- Fits by hand
- Rated up to 100 °C
Typical applications
- Bulk handling conveyors
- Paper converting machines
- Farm equipment
- Fans and air movers
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 75 mm |
|---|---|
| Width (B) | 27 mm |
| Mass | 0.0164 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 207 |
|---|---|
| Manufacturer part number | ECY 207 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 207 |
ECY 207 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is ECY 207 for?
207-size ball bearing units with a 75 mm housing opening.
How deep is it?
27 mm overall, against 35 mm for ECW 207.
Can it be refitted?
Yes. It pulls out and presses back in.
What is the temperature limit?
100 °C.
Need a price for ECY 207?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
