ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
19.05 × 45.7 mm

Flanged ball bearing units

F2B 012-WF

Oval flange unit for 3/4 in shafts that pairs an extended inner ring with an eccentric locking collar.

Bore d
19.05 mm
Width B
45.7 mm
Dynamic C
12.7 kN
Static C₀
6.55 kN
Limiting speed
8,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 012-WF is a two-bolt oval flange unit for 3/4 in (19.05 mm) shafts that combines an extended inner ring with eccentric collar locking. The insert sits in a cast iron housing and is protected by seals and flingers on both sides.

Wide ring plus eccentric collar

The YEL 204-012-2F insert has a 43.7 mm wide inner ring, the widest of our 012 units, which spreads its grip over a longer stretch of shaft. Instead of set screws in the ring, it locks with an eccentric collar that is turned in the direction of rotation and then secured.

Specifications

  • Shaft diameter (d): 3/4 in (19.05 mm)
  • Bolt hole centres (J): 89.7 mm
  • Overall height (H): 113 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 29 mm
  • Overall width (T): 45.7 mm
  • Inner ring width (B1): 43.7 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 12.7 kN
  • Basic static load rating (C0): 6.55 kN
  • Fatigue load limit (Pu): 0.28 kN
  • Limiting speed: 8 500 r/min (h6 shaft)
  • Insert bearing: YEL 204-012-2F (extended inner ring, eccentric locking collar)
  • Locking: Eccentric collar with a 1/4-28 UNF set screw, about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.6 kg

Mounting tips

  1. Mount the unit and bolt it to the frame.
  2. Slide the eccentric collar over the inner ring.
  3. Turn it in the running direction until it locks, then tighten its set screw to about 4 N·m.
  4. Grease through the fitting as needed.

Typical applications

  • Heavier conveyor drives
  • Agricultural machinery
  • Shafts that run in one direction
  • Material handling lines

Key features

  • Fits 3/4 in (19.05 mm) shafts
  • Extended 43.7 mm inner ring
  • Eccentric collar locking
  • Seals with flingers on both sides
  • Takes the ECY 204 end cover

Typical applications

  • Heavier conveyor drives
  • Agricultural machinery
  • Shafts that run in one direction
  • Material handling lines

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 012-WF
Bore diameter (d) 19.05 mm
Width (B) 45.7 mm
Mass 0.6 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 012-WF
Basic dynamic load rating (C) 12.7 kN
Basic static load rating (C₀) 6.55 kN
Fatigue load limit (Pu) 0.28 kN
Limiting speed 8500 r/min

Design and execution

Design & execution for F2B 012-WF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 012-WF
Part number F2B 012-WF
Manufacturer part number F2B 012-WF
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 012-WF
Manufacturer Their designation Our equivalent
SKF F2B 012-WF F2B 012-WF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What makes F2B 012-WF different?

It has an extended 43.7 mm inner ring locked with an eccentric collar, rather than set screws.

What shaft size does it fit?

3/4 in (19.05 mm).

How wide is the unit overall?

45.7 mm.

How much does it weigh?

About 0.6 kg.

Need a price for F2B 012-WF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 012-WF Price on application
Get a quote

Quote for F2B 012-WF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.