ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
19.05 × 37.4 mm

Flanged ball bearing units

F2B 012-TF

Two-bolt oval flange bearing for 3/4 in shafts, with an extended inner ring, set screw locking and seals with flingers.

Bore d
19.05 mm
Width B
37.4 mm
Dynamic C
12.7 kN
Static C₀
6.55 kN
Limiting speed
8,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 012-TF is a cast iron, two-bolt oval flange unit built around a 3/4 in (19.05 mm) bore. Its sealed insert has an extended inner ring locked by set screws, which makes it a dependable everyday choice for conveyors and handling equipment. It follows North American inch standards.

Extended inner ring, flinger protection

The YAR 204-012-2F insert has a 31 mm wide inner ring, giving the set screws a broad seat on the shaft. It works whether the shaft runs one way or reverses. Each side has a flinger in front of the contact seal to throw off coarse dirt.

Specifications

  • Shaft diameter (d): 3/4 in (19.05 mm)
  • Bolt hole centres (J): 89.7 mm
  • Overall height (H): 113 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 29 mm
  • Overall width (T): 37.4 mm
  • Inner ring width (B1): 31 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 12.7 kN
  • Basic static load rating (C0): 6.55 kN
  • Fatigue load limit (Pu): 0.28 kN
  • Limiting speed: 8 500 r/min (h6 shaft)
  • Insert bearing: YAR 204-012-2F (extended inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF), about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.428 kg

Mounting tips

  1. Wipe the shaft clean and check it for damage.
  2. Position the unit and bolt the flange to the frame through both holes.
  3. Tighten the set screws to about 4 N·m once the shaft is aligned.
  4. Use the grease fitting to relubricate at regular intervals.

Typical applications

  • Belt conveyors in dusty areas
  • Reversing drives
  • Farm and feed equipment
  • General material handling

Key features

  • Fits 3/4 in (19.05 mm) shafts
  • Extended 31 mm inner ring
  • Set screw locking
  • Seals with flingers on both sides
  • Works with constant or reversing rotation

Typical applications

  • Belt conveyors in dusty areas
  • Reversing drives
  • Farm and feed equipment
  • General material handling

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 012-TF
Bore diameter (d) 19.05 mm
Width (B) 37.4 mm
Mass 0.428 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 012-TF
Basic dynamic load rating (C) 12.7 kN
Basic static load rating (C₀) 6.55 kN
Fatigue load limit (Pu) 0.28 kN
Limiting speed 8500 r/min

Design and execution

Design & execution for F2B 012-TF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 012-TF
Part number F2B 012-TF
Manufacturer part number F2B 012-TF
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 012-TF
Manufacturer Their designation Our equivalent
SKF F2B 012-TF F2B 012-TF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What size shaft is F2B 012-TF for?

3/4 in (19.05 mm).

Can it run in both directions?

Yes. Set screw locking suits constant or alternating rotation.

What is the dynamic load rating?

12.7 kN.

What end cover fits?

The ECY 204 end cover suits this unit.

Need a price for F2B 012-TF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 012-TF Price on application
Get a quote

Quote for F2B 012-TF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.