ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
22.225 × 38.9 mm

Flanged ball bearing units

F2B 014-TF-AH

Air handling flange bearing for 7/8 in shafts, with set screw locking and a cast iron oval housing.

Bore d
22.225 mm
Width B
38.9 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 014-TF-AH is a two-bolt oval flange unit for 7/8 in (22.225 mm) shafts, specified for air handling equipment. It shares the cast iron housing and load ratings of the F2B 014-TF and is built to North American inch standards.

For fans, blowers and HVAC

Air handling equipment often runs continuously at a steady speed. This AH version is intended for that kind of work, and it bolts onto the same 98.8 mm hole pattern as the standard 014 units.

Insert and sealing

Inside is a YAR 205-014-2F insert with an extended inner ring and set screws. Seals with flingers on both sides help keep dust in the airflow out of the bearing.

Specifications

  • Shaft diameter (d): 7/8 in (22.225 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 38.9 mm
  • Inner ring width (B1): 34.1 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YAR 205-014-2F (extended inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF), about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.603 kg

Mounting tips

  1. Clean the fan shaft.
  2. Mount the unit and bolt it to the frame with 7/16 in bolts.
  3. Tighten the set screws to about 4 N·m after aligning the shaft.
  4. Regrease according to your fan maintenance plan.

Typical applications

  • Fan shafts
  • Air handling units
  • Ventilation blowers
  • Cooling and HVAC equipment

Key features

  • Specified for air handling
  • Fits 7/8 in (22.225 mm) shafts
  • Set screw locking
  • Seals with flingers
  • 14 kN dynamic rating

Typical applications

  • Fan shafts
  • Air handling units
  • Ventilation blowers
  • Cooling and HVAC equipment

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 014-TF-AH
Bore diameter (d) 22.225 mm
Width (B) 38.9 mm
Mass 0.603 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 014-TF-AH
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 014-TF-AH
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 014-TF-AH
Part number F2B 014-TF-AH
Manufacturer part number F2B 014-TF-AH
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 014-TF-AH
Manufacturer Their designation Our equivalent
SKF F2B 014-TF-AH F2B 014-TF-AH

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What is the AH version for?

It is specified for air handling equipment such as fans and blowers.

Does it fit the same mounting as F2B 014-TF?

Yes. The housing dimensions are the same.

What shaft does it fit?

7/8 in (22.225 mm).

How much does it weigh?

About 0.6 kg.

Need a price for F2B 014-TF-AH?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 014-TF-AH Price on application
Get a quote

Quote for F2B 014-TF-AH

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.