ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
25 × 46 mm

Flanged ball bearing units

F2B 25M-WF

25 mm oval flange unit with a wide 44.4 mm inner ring and eccentric collar locking.

Bore d
25 mm
Width B
46 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 25M-WF is a cast iron, two-bolt oval flange unit for 25 mm shafts. Its YEL 205-2F insert has a wide inner ring and locks with an eccentric collar, with flinger seals on both sides.

Wide support, collar lock

The 44.4 mm inner ring spreads the bearing grip along the shaft, and the eccentric collar locks it in the direction of rotation. At 46 mm overall, it is the widest 25 mm unit in this group.

Specifications

  • Shaft diameter (d): 25 mm
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 46 mm
  • Inner ring width (B1): 44.4 mm
  • Bolt holes (N): 12.7 mm, for M10 bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YEL 205-2F (extended inner ring, eccentric locking collar)
  • Locking: Eccentric collar with an M6x0.75 set screw
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.574 kg

Mounting tips

  1. Mount the unit and bolt it down with M10 bolts on 98.8 mm centres.
  2. Slide the collar over the inner ring.
  3. Rotate it in the running direction until it locks.
  4. Secure it with the M6x0.75 set screw.

Typical applications

  • Heavier one-direction drives
  • Agricultural machinery
  • Bulk conveyors
  • Industrial fans with metric shafts

Key features

  • Fits 25 mm metric shafts
  • Wide 44.4 mm inner ring
  • Eccentric collar locking
  • Seals with flingers
  • Takes the ECY 205 end cover

Typical applications

  • Heavier one-direction drives
  • Agricultural machinery
  • Bulk conveyors
  • Industrial fans with metric shafts

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 25M-WF
Bore diameter (d) 25 mm
Width (B) 46 mm
Mass 0.574 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 25M-WF
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 25M-WF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 25M-WF
Part number F2B 25M-WF
Manufacturer part number F2B 25M-WF
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 25M-WF
Manufacturer Their designation Our equivalent
SKF F2B 25M-WF F2B 25M-WF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What makes F2B 25M-WF different from F2B 25M-FM?

It has a much wider inner ring (44.4 mm) and flingers in front of the seals.

What shaft does it fit?

A 25 mm shaft.

What is the overall width?

46 mm.

What end cover fits?

The ECY 205 end cover.

Need a price for F2B 25M-WF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 25M-WF Price on application
Get a quote

Quote for F2B 25M-WF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.