F2B 015-TF-AH
Air handling flange unit for 15/16 in shafts, with set screw locking and a cast iron two-bolt housing.
- Bore d
- 23.813 mm
- Width B
- 38.9 mm
- Dynamic C
- 14 kN
- Static C₀
- 7.8 kN
- Limiting speed
- 7,000 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 015-TF-AH is an oval flange unit for 15/16 in (23.813 mm) fan and blower shafts. It is specified for air handling duty and shares its housing and load ratings with the F2B 015-TF.
A common fan shaft size
15/16 in shafts turn up often on fans and air handling equipment. This unit bolts on with two 7/16 in bolts on 98.8 mm centres and supports the shaft with a sealed YAR 205-015-2F insert.
Protection against dust
A flinger on each side throws off particles before they reach the contact seal behind it. Set screws in the extended inner ring hold the bearing on the shaft.
Specifications
- Shaft diameter (d): 15/16 in (23.813 mm)
- Bolt hole centres (J): 98.8 mm
- Overall height (H): 123.8 mm
- Overall length (L): 69.9 mm
- Housing width (A): 29.6 mm
- Overall width (T): 38.9 mm
- Inner ring width (B1): 34.1 mm
- Bolt holes (N): 12.7 mm, for 7/16 in bolts
- Basic dynamic load rating (C): 14 kN
- Basic static load rating (C0): 7.8 kN
- Fatigue load limit (Pu): 0.335 kN
- Limiting speed: 7 000 r/min (h6 shaft)
- Insert bearing: YAR 205-015-2F (extended inner ring, set screw locking)
- Locking: Set screws (1/4-28 UNF), about 4 N·m
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.61 kg
Mounting tips
- Clean the shaft and check its condition.
- Bolt the flange to the fan frame.
- Align the shaft and tighten the set screws to about 4 N·m.
- Relubricate at the intervals your fan maker gives.
Typical applications
- Air handling units
- Supply and exhaust fans
- Blowers
- HVAC plant rooms
Key features
- Specified for air handling
- Fits 15/16 in (23.813 mm) shafts
- Set screw locking
- Seals with flingers
- Up to 7 000 r/min
Typical applications
- Air handling units
- Supply and exhaust fans
- Blowers
- HVAC plant rooms
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 23.813 mm |
|---|---|
| Width (B) | 38.9 mm |
| Mass | 0.61 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 14 kN |
|---|---|
| Basic static load rating (C₀) | 7.8 kN |
| Fatigue load limit (Pu) | 0.335 kN |
| Limiting speed | 7000 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 015-TF-AH |
|---|---|
| Manufacturer part number | F2B 015-TF-AH |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 015-TF-AH |
F2B 015-TF-AH |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is F2B 015-TF-AH used for?
Air handling equipment such as fans and blowers.
What shaft does it fit?
15/16 in (23.813 mm).
Is it interchangeable with F2B 015-TF?
Yes. It has the same dimensions and load ratings.
What is the limiting speed?
7 000 r/min with an h6 shaft.
Need a price for F2B 015-TF-AH?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
