F2B 20M-WF
20 mm oval flange unit with an extended inner ring and eccentric collar locking.
- Bore d
- 20 mm
- Width B
- 45.7 mm
- Dynamic C
- 12.7 kN
- Static C₀
- 6.55 kN
- Limiting speed
- 8,500 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 20M-WF is an oval two-bolt flange unit for 20 mm shafts that combines a wide inner ring with eccentric collar locking. Its sealed YEL 204-2F insert is housed in cast iron and protected by flingers on both sides.
Long grip on the shaft
With a 43.7 mm inner ring, this insert supports the shaft over a longer length than the TF or FM versions. The eccentric collar, secured by an M6x0.75 set screw, locks it in the direction of rotation.
Specifications
- Shaft diameter (d): 20 mm
- Bolt hole centres (J): 89.7 mm
- Overall height (H): 113 mm
- Overall length (L): 60.3 mm
- Housing width (A): 29 mm
- Overall width (T): 45.7 mm
- Inner ring width (B1): 43.7 mm
- Bolt holes (N): 11.11 mm, for M10 bolts
- Basic dynamic load rating (C): 12.7 kN
- Basic static load rating (C0): 6.55 kN
- Fatigue load limit (Pu): 0.28 kN
- Limiting speed: 8 500 r/min (h6 shaft)
- Insert bearing: YEL 204-2F (extended inner ring, eccentric locking collar)
- Locking: Eccentric collar with an M6x0.75 set screw
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.55 kg
Mounting tips
- Fit the unit on the shaft and bolt it down with M10 bolts.
- Slide the collar onto the inner ring.
- Turn it in the running direction until it locks, then tighten the set screw.
- Relubricate through the grease fitting.
The ECY 204 end cover can be added to close off the shaft end.
Typical applications
- Heavier metric conveyors
- Agricultural drives
- One-direction shafts
- Bulk handling equipment
Key features
- Fits 20 mm metric shafts
- Extended 43.7 mm inner ring
- Eccentric collar locking
- Seals with flingers
- Takes the ECY 204 end cover
Typical applications
- Heavier metric conveyors
- Agricultural drives
- One-direction shafts
- Bulk handling equipment
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 20 mm |
|---|---|
| Width (B) | 45.7 mm |
| Mass | 0.55 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 12.7 kN |
|---|---|
| Basic static load rating (C₀) | 6.55 kN |
| Fatigue load limit (Pu) | 0.28 kN |
| Limiting speed | 8500 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 20M-WF |
|---|---|
| Manufacturer part number | F2B 20M-WF |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 20M-WF |
F2B 20M-WF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is special about F2B 20M-WF?
It combines a wide 43.7 mm inner ring with an eccentric locking collar.
What shaft does it fit?
A 20 mm shaft.
What is the overall width?
45.7 mm.
What end cover fits?
The ECY 204 end cover.
Need a price for F2B 20M-WF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
