F2B 103-LF-AH
1-3/16 in fan flange unit with concentric locking, flinger seals and a cast iron housing.
- Bore d
- 30.163 mm
- Width B
- 44.2 mm
- Dynamic C
- 19.5 kN
- Static C₀
- 11.2 kN
- Limiting speed
- 6,300 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 103-LF-AH is a two-bolt oval flange unit for 1-3/16 in (30.163 mm) shafts, specified for air handling equipment. It uses concentric locking to hold the shaft.
Even grip for fan shafts
Concentric locking clamps the shaft evenly all the way round and is tightened with one M5 screw. This avoids the point marks that set screws can leave. Flingers on both sides keep airborne dust out.
Specifications
- Shaft diameter (d): 1-3/16 in (30.163 mm)
- Bolt hole centres (J): 116.7 mm
- Overall height (H): 141.3 mm
- Overall length (L): 79.4 mm
- Housing width (A): 34.9 mm
- Overall width (T): 44.2 mm
- Inner ring width (B1): 37.2 mm
- Bolt holes (N): 12.7 mm, for 7/16 in bolts
- Basic dynamic load rating (C): 19.5 kN
- Basic static load rating (C0): 11.2 kN
- Fatigue load limit (Pu): 0.475 kN
- Limiting speed: 6 300 r/min (h6 shaft)
- Insert bearing: YSP 206-103 SB-2F (concentric locking)
- Locking: Concentric locking, tightened with an M5 screw
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.808 kg
How to fit it
- Clean the fan shaft.
- Bolt the unit to the frame with two 7/16 in bolts.
- Align the shaft.
- Tighten the M5 locking screw.
Where it is used
- Air handling units
- Fans and blowers
- Ventilation systems
- HVAC plant
Key features
- Specified for air handling
- Fits 1-3/16 in (30.163 mm) shafts
- Concentric locking
- Seals with flingers
- About 0.81 kg
Typical applications
- Air handling units
- Fans and blowers
- Ventilation systems
- HVAC plant
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 30.163 mm |
|---|---|
| Width (B) | 44.2 mm |
| Mass | 0.808 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 19.5 kN |
|---|---|
| Basic static load rating (C₀) | 11.2 kN |
| Fatigue load limit (Pu) | 0.475 kN |
| Limiting speed | 6300 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 103-LF-AH |
|---|---|
| Manufacturer part number | F2B 103-LF-AH |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 103-LF-AH |
F2B 103-LF-AH |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is F2B 103-LF-AH used for?
Air handling equipment such as fans and blowers.
How does it lock to the shaft?
With concentric locking, tightened by an M5 screw.
What shaft does it fit?
A 1-3/16 in (30.163 mm) shaft.
What end cover fits?
The ECY 206 end cover.
Need a price for F2B 103-LF-AH?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
