ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
25 × 38.9 mm

Flanged ball bearing units

F2B 25M-TR

25 mm oval flange unit with multiple-lip contact seals and flingers, for dirtier working conditions.

Bore d
25 mm
Width B
38.9 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
4,300 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 25M-TR is a two-bolt oval flange unit for 25 mm shafts, fitted with extra sealing for tough, dirty environments. It has a cast iron housing and an insert with an extended inner ring and set screw locking.

Extra sealing for harsh conditions

Where the standard TF unit uses a single contact seal behind each flinger, the TR version has multiple-lip contact seals. The added lips mean more friction, so its limiting speed is lower at 4 300 r/min, but the bearing is better shielded from dust, slurry and wash water. The unit can also take an optional end cover.

Specifications

  • Shaft diameter (d): 25 mm
  • Bolt hole centres (J): 98.8 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 38.9 mm
  • Inner ring width (B1): 34.1 mm
  • Attachment bolts: M10 bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Limiting speed: 4 300 r/min (h6 shaft)
  • Locking: Set screws in the extended inner ring
  • Sealing: Multiple-lip contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.586 kg

Mounting tips

  1. Clean the shaft and check its condition.
  2. Bolt the unit down with two M10 bolts.
  3. Align the shaft and tighten the set screws evenly.
  4. Relubricate through the grease fitting and check the seals at each service.

Typical applications

  • Quarry and aggregate conveyors
  • Wash-down areas
  • Agricultural machines in dusty fields
  • Slow to medium speed drives

Key features

  • Fits 25 mm metric shafts
  • Multiple-lip contact seals
  • Flingers on both sides
  • Set screw locking
  • Built for heavy contamination

Typical applications

  • Quarry and aggregate conveyors
  • Wash-down areas
  • Agricultural machines in dusty fields
  • Slow to medium speed drives

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 25M-TR
Bore diameter (d) 25 mm
Width (B) 38.9 mm
Mass 0.586 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 25M-TR
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Limiting speed 4300 r/min

Design and execution

Design & execution for F2B 25M-TR
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 25M-TR
Part number F2B 25M-TR
Manufacturer part number F2B 25M-TR
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 25M-TR
Manufacturer Their designation Our equivalent
SKF F2B 25M-TR F2B 25M-TR

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

How is F2B 25M-TR different from F2B 25M-TF?

It has multiple-lip contact seals for better protection against contamination, with a lower limiting speed.

Why is the speed limit lower?

The extra seal lips add friction, so the limiting speed is 4 300 r/min.

What shaft does it fit?

A 25 mm shaft.

Can it take an end cover?

Yes. An end cover is optional.

Need a price for F2B 25M-TR?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 25M-TR Price on application
Get a quote

Quote for F2B 25M-TR

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.